Mechanical Writings

0.007 ~ 6.98 mm thickness of aluminum and aluminum alloy of eight test results of linear regression analysis to determine the tensile strength of aluminum and aluminum alloy materials and the proportional limit σ σ_b great linear. During the nominal yield strength σ_ (0.2) determine, in order to determine the elastic modulus E and select P_2 points, 99.5% confidence level by selecting σ_2 ≤ σ relation is derived: Click here to select the various relationship tests P_2 point, all meet the requirements of σ_2 ≤ σ. The experts are given a daily side relation σ_2 = 0.4σ_b select a time, σ_2> σ 47.6% number of trials. Thus gives the actual tensile strength of aluminum and aluminum within the range of Kids in σ_b [30,280 MPa] of the σ_2 value and determination of σ_ (0.2) steps, with the practicality and convenience.
【Author】: Bohai Aluminum Industries Co., Ltd.
Key words: aluminum and aluminum alloys; mechanical performance test; proportional limit; yield strength; tensile strength
】 【DOI: cnki: ISSN :1007-7235 .0.1993-12-010
Snapshot】 【text:
1 Introduction experimental analysis of gold materials were put forward to solve the problem. Introduced in 1991, my company manufactured by Shimadzu automatic control by computer of a 50 kNA AG electronic tensile machine, is found in actual use, the yield strength of aluminum in the name of a.2 Determination, the daily party experts be given by Cheung and select the elastic modulus E P: Point of empirical formula ap: = 0.4 grumble, have occurred P '.
Download the full text access
CAJ format PDF format and support
You can download the full text CNKI
Special note:
The document summary information, by the Chinese HowNet (http://www.cnki.com.cn) provided
Wooden mirror insects provide only summary index
Researchers can facilitate faster browsing and does not provide the full text,
The full text of this document is not responsible for the content.
Welcome to assist us in supervision and management, if you have objections to the content,
Please send an email to emuch@126.com contact immediately notify the administrator
We guarantee a working day to give a timely manner.
If you download the full text of this document and the copyright is having problems, please refer to the following contact information:
CNKI Service Hotline :400 -810-9888
CNKI set card hotline :800 -810-6613
CNKI :010 -62783978 night shift (night call after 21:30)
Online Consultation: http://help.cnki.net
Customer Service: http://service.cnki.net
E-mail: help@cnki.net

Home> academic journals> Ship Mechanics> 2005 3> eccentric Cracked Plates stress intensity factor and the ultimate tensile strength of
Cracked Plates eccentric stress intensity factor and the ultimate tensile strength of Stress Intensity Factor and Ultimate Tensile Strength Analysis of Eccentrically Cracked Plates
Successfully added!
You can in the "My Services" in the view you add a reference to the notification list, and configure access to notices.
Close Download PDF Reader
Fatigue crack on the structural strength of ships with the weakening effect can not be ignored in past studies, mainly from the perspective of the fracture mechanics analysis of fatigue crack stress field, while the limit for the static strength of cracked plate of relatively small. Based on the limited element on the basis of a rectangular plate eccentric cracks the stress intensity factor and the ultimate tensile strength were analyzed. For the eccentric crack stress intensity factor, the calculation method effectively simplified [5] proposed a large unit finite element model, and for the analysis of crack eccentricity on the stress intensity factor. For the eccentric crack ductility board with plastic finite element calculations for a large number of combinations to analyze the relative crack length, material yield ratio and the crack eccentricity degree on the board of the tensile ultimate strength, and gives a convenient formula for calculating the regression. The regression formula contains several parameters on the board of the ultimate tensile strength, good agreement with the experimental results. of: Wang Fang HUANG Xiao-ping CUI Wei-cheng WANG FangHuang Xiao-pingGUI Wei-cheng Author: Wang Fang, Huang Xiaoping, WANG Fang, Huang Xiao-ping (Shanghai Jiaotong University, Institute of Naval Architects and Ocean and Civil Engineering, Shanghai, 200030)
Wei-Cheng Cui, GUI Wei-cheng (China Ship Scientific Research Center, Jiangsu, Wuxi, 214082) Title: Ship mechanical ISTICEIPKU English title: JOURNAL OF SHIP MECHANICS, the volume (of): 2005 9 (3) Key words: U661. 43 Key words: eccentric crack stress intensity factor than the ultimate tensile strength yield eccentric crack stress intensity factor ultimate tensile strength yield ratio machine marked DOI: U66 O34 machine standard Keywords: eccentric crack stress intensity factor of cracks in ultimate tensile strength strength Analysis of Ultimate Tensile Strengthstress intensity factorultimate tensile strengththe finite element methodstrength of finite element analysis of fatigue crack eccentricity of the ultimate strength regression formula plastic finite element stress cracks weaken the structural strength of the role of crack length Fund Project: DOI: References (7) Paik J K. Thayamballi A KUltimate strength of aging ships 2002 Bo Cerup Simonsen.Rikard TomqvistExperimental and numerical modeling of ductile crack propagation in large-scale shell structures 2004 (01) Achenbach J D. Li Z LPlane stress crack-line fields for crack growth in an elastic perfectly -plastic material 1984 (03) Hu Yongji in the "First Principles" of the hull structural strength evaluation system [Dissertation] 2004 Miyata Hiroshi.Kusumoto TakashiThe analysis of stress intensity factors using finite element method (in Japanese) 1977 Jing Hongyang.Huo LixingThe effect of yield ratio on the fracture toughness of high strength steel (in Chinese) 1996 (03) China Research Institute of AviationHandbook of stress intensity factors (in Chinese) 1993
>> More . similar to the literature cited relevant literature Bowen (3) Wang Fang. Han Yun. Wei-Cheng Cui stiffened plate with a crack defect analysis of the residual tensile strength [Papers] - Ship Mechanics, 2007 (3) Wang Fang . Wei-Cheng Cui Crack parameters affecting the tensile strength of plate finite element analysis [Papers] - Ship Mechanics, 2006 (6) Wang Fang. Qiang. Huang Xiaoping. Wei-Cheng Cui center rectangular plate oblique crack limit Fracture Strength Analysis [Papers] - Ship Mechanics, 2006 (3)
>> More .

People who read this also read: Water resources development strategy of Fujian Reflections rebound detection of early age strength of high performance concrete technology oilfield wastewater treatment technology of a hydropower plant modal parameter identification method for Small experience in watershed model of storm flood calculation of hydropower development on the Upper Yangtze River watershed ecological environmental impact of technical characteristics of computer monitoring system H9000V4.0 Almost AHP based on improved fuzzy comprehensive evaluation model Jihongtan reservoir seepage and groundwater control report on World Water Day: Global Water resource management challenges facing the community for more hot posts